delta.f

The quality of the dampening solution used has a direct effect on the stability of the printing process, especially when using spray dampening bars.

By adding the technotrans delta.f cross-flow filtration to the machine set-up. the conditions for using spray dampening units are greatly improved.

The high filtration quality of the ceramic membrane even allows separation of oil-based contamination. Used dampening solution is thoroughly filtered and by using the delta.f 99% of the filtered dampening solution can be re-introduced into the cycle. Costs of disposal along with the need for fresh additives are reduced drastically.

order brochure
beta.f
The compact beta.f fine filtration unit was developed on the basis of years of experience.

It operates continuously in a bypass connection to the dampening solution tank of the circulator.

It relies on a two-step filtration method. The pre-filter system with its filter cartridges is used to pre-clean the dampening solution and to relieve the strain on the main filter module.

The main filter is used for intensive cleaning of the dampening solution, using a powerful deep-bed filter.

The quality of the filter modules is monitored by integrated pressure sensors.

The result of this continuous bypass cleaning process is a perfectly decontaminated dampening solution and a clean system, from the dampening solution tank to the dampening solution trays of the printing units.

If you require an individual solution, then we will develop it with you. Just contact us for details.

order brochure
order calculation of profitability